How To Remove A Kohler Shower Handle

How to remove Kohler shower handle? Earlier y'all can exercise any sort of fault finding on a Kohler shower valve, y'all volition need to remove the shower valve handle. The handle is the start part to have off. But some handles don't even have visible screws. No trouble . Here in this article I will testify you various kinds of Kohler shower handles and how to remove them .

How to remove Kohler shower handle – with Exposed Screws

• Using a Phillips screwdriver, unscrew the screw and remove the handle, bonnet and sleeve from the valve stem.
• Using a Phillips screwdriver, unscrew the two screws from the confront plate. Remove the escutcheon and the face plate.
• If applicable, use a flat-blade screwdriver to remove the pivot from the adapter. Unscrew and remove the adapt or from the valve.

Kohler shower handle – with Plug Button

• Using a flat-blade screwdriver, gently pry the plug button from the front of the valve trim.
• Using a Phillips screwdriver, unscrew the spiral and remove the handle and adapter from the valve stalk.
• If applicable, rotate the comprehend counterclockwise to remove.
• Slide the sleeve off the valve.
• Using a Phillips screwdriver, unscrew the ii screws and remove the face plate.
• If applicable, use a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

• Using a flat-bract screwdriver, gently pry the plug button from the front of the valve trim.
• Using a Phillips screwdriver, unscrew the screw and remove the handle and adapter from the valve stem.
• Using a 3/32" hex wrench, loosen the setscrew and slide the bonnet off the valve.
• Turn the sleeve counterclockwise and remove information technology from the valve.
• Unscrew the collar. You lot may demand a special tool (M-87448) to unscrew the collar. Remove the face plate and the collar.
• Using a Phillips screwdriver, unscrew the 2 screws and remove the seal plate.
• If applicable, use a flat-blade screwdriver to remove the pivot from the adapter. Unscrew and remove the adapter from the valve.

Trim with Setscrews

• Using a 3/32" hex wrench, loosen the ii setscrews. Yous may need to rotate the sleeve to access both setscrews. Slide the handle and sleeve off the valve.
• Using a Phillips screwdriver, unscrew the screw and remove the adapter from the valve stem.
• Unscrew the collar. You may need a special tool (Yard-87448) to unscrew the collar. Remove the face plate and the collar.
• Using a Phillips screwdriver, unscrew the two screws and remove the seal plate.
• If applicable, use a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

• Using a 3/32" hex wrench, loosen the setscrew and slide the handle off the valve trim.
• Using a Phillips screwdriver, unscrew the screw and remove the bonnet and sleeve from the valve stem.
• Using a Phillips screwdriver, unscrew the 2 screws from the face plate. Remove the washer and the face plate.
• If applicative, use a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

• Using a 3/32" hex wrench, loosen the setscrew and slide the handle and adapter off the valve.
• Slide the sleeve off the valve.
• Using a Phillips screwdriver, unscrew the 2 screws and remove the face plate.
• If applicative, utilise a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

• Using a 3/32" hex wrench, loosen the two setscrews. Slide the handle and bonnet off the valve.
• Gently pry the cover plate from the escutcheon to betrayal the two screws.
• Using a Phillips screwdriver, unscrew the screw and remove the adapter from the valve stalk.
• Using a Phillips screwdriver, unscrew the ii screws and remove the escutcheon.
• If applicable, use a apartment-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

How to remove Kohler shower handle – With Threaded Bonnets

• Firmly grasp the handle. Turn the bonnet counterclockwise and remove the handle and bonnet from the valve stem.
• Remove the face plate from the seal plate.
• Using a Phillips screwdriver, unscrew the ii screws and remove the seal plate.
• If applicative, utilise a flat-blade screwdriver to remove the pivot from the adapter. Unscrew and remove the adapter from the valve.

• Firmly grasp the handle. Turn the bonnet counterclockwise and remove the handle and bonnet from the valve.
• If applicable, remove the pivot ring. Remove the confront plate from the valve.
• Using a Phillips screwdriver, unscrew the two screws and remove the retainer.
• If no screws are present, unscrew and remove the retainer.

• Firmly grasp the handle. Turn the bonnet counterclockwise and remove the handle and bonnet from the valve stalk.
• Using a Phillips screwdriver, unscrew the two screws and remove the handle sleeve, shroud, and face plate.
• If applicable, use a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

How to remove Kohler shower handle – With Eye Cap

• While holding the handle arm, unscrew the end cap. Remove the stop cap, washer, and brusk sleeve.
• Slide the handle arm from the bonnet. Ensure the O-ring and long sleeve are nonetheless in identify.
• Slide the heart cap from the bonnet.
• Using a 3/32" hex wrench, unscrew the screw from the bonnet.
• Slide the bonnet and sleeve from the valve stem.
• Using a Phillips screwdriver, unscrew the two screws from the escutcheon assembly. Remove the escutcheon assembly and the face plate.
• If applicative, use a flat-blade screwdriver to remove the pin from the adapter. Unscrew and remove the adapter from the valve.

Wikipedia

Source: https://strydomwebdevelopment.co.za/how-to-remove-kohler-shower-handle/

Share this post